GE Invenia ABUS 2.0

Customizing the Invenia ABUS 2.0
Invenia ABUS 2.0 – System Setup and Basic Service Manual 3-57
4700-0043-00 Rev. 4
General Configuration
From the General Configuration menu, you can configure the
following:
NOTE: Only menu items in bold are described in this version of the
Proprietary Service Manual.
1. Worklist server location
See ‘Setting up Connectivity between Invenia ABUS 2.0 and
destinations’ on page 3-55 for more information.
2. MPPS Server location
3. Destinations (single or multiple)
4. User Interface operating language
5. Manage System Storage.
The Status gauge displays the Invenia ABUS 2.0 hard disk
capacity (250GB)
6. Acoustic Power (%)
7. Scan depth (4.0cm is default)
Figure 3-18. General Configuration Menu