GE Invenia ABUS 2.0 User Manual

Networking setup requirements
Invenia ABUS 2.0 – System Setup and Basic Service Manual 2-17
4700-0043-00 Rev. 4
DICOM setup requirements
To configure the Ultrasound system to work with other network
connections, the site’s network administrator must provide
information to complete the form “Worksheet for DICOM
Network Information”. Ensure that there are no spaces in any
field of the form.
Entries must include:
• A host name, local port number, AE Title, IP address and
Net Mask for the Ultrasound system.
• The IP addresses for the default gateway and other routers
at the site for ROUTING INFORMATION.
• The host name, IP address, port and AE Title for each
device the site wants connected to the Ultrasound system
for DICOM APPLICATION INFORMATION. A field for the
make (manufacturer) and the revision of the device, is also
included. This information may be useful for error solving.

GE Invenia ABUS 2.0 Specifications

General

Brand	GE
Model	Invenia ABUS 2.0
Category	Medical Equipment
Language	English