GE Invenia ABUS 2.0

System Setup
3-62 Invenia ABUS 2.0 – System Setup and Basic Service Manual
4700-0043-00 Rev. 4
Language Selection
The User Interface Language for input and display can be
selected from the drop down list:
Figure 3-23.
Default Interface Language setting is English.
To change the User Interface Language:
1. Touch the Configuration button , and on the General tab
select a language from the Interface Language Dropdown
List.
2. At the prompt, please restart for language changes to
take effect, power down the system by pressing the power
button on the front of the unit.
3. Power on the system back on for the Interface Language
selection to be applied. The onscreen keyboard will now
display any language specific characters and user prompts
and displays will be in the selected language.
NOTE: An account with a password set with any specific language
characters may not be accessible if the language setting is
changed on the system.