GE Invenia ABUS 2.0

Functional Checks
4-6 Invenia ABUS 2.0 – System Setup and Basic Service Manual
4700-0043-00 Rev. 4
2. Press once on the On/Off button on the Invenia ABUS 2.0
to boot the unit.
Figure 4-3. On/Off
Power shut down
When you switch off the unit by pressing the Power button, the
system performs an automatic shutdown sequence.
NOTE: If the system does not shut down by lightly pressing the Power
button, you can press and hold down the Power button until the
system shuts down.