GE Invenia ABUS 2.0

Diagnostics/Troubleshooting
7-50 Invenia ABUS 2.0 – System Setup and Basic Service Manual
4700-0043-00 Rev. 4
Error Code List (continued)
GE US Info Messages
36001 GEUS Info INFO_TRANSDUCER_REMOVE_001 - Transducer at port %d is
removed!
36002 GEUS Info INFO_TRANSDUCER_INSERT_002 - transducer %s at port %d is
inserted
36003 GEUS Info INFO_TRANSDUCER_INDEFINITE_003 - Indefinite Transducer
Error :transducer %s in connector %
36004 GEUS Info INFO_TRANSDUCER_NOT_ACCEPTED_004 -
transducer in connector %d not accepted by system
36005 GEUS Info INFO_SYSTEM_SHUTDOWN_005 - Do you
want to shut down the system?
36006 GEUS Info INFO_MAJOR_SETUP_006 - A minor setup problem occured.
Image quality may not be optimal
36007 GEUS Info INFO_BEP_VOL_007 - Bep Voltage is out of range!
36008 GEUS Info INFO_BEP_FAN_008 - Bep Fan is abnormal!
36009 GEUS Info INFO_TEMP_009 - Bep temperature is out of range!
36010 GEUS Info INFO_TRANSDUCER_010 - Transducer is disconnected
36011 GEUS Info INFO_DIAG_MODE_011 - Enter Diagnostics Mode
36012 GEUS Info INFO_TRANSDUCER_SCANHEAD_REMOVE_012
- Transducer scan head is disconnected
36013 GEUS Info INFO_TRANSDUCER_SCANHEAD_NOT_ACCEPT
ED_013 - The transducer is not supported
36014 GEUS Info INFO_MPSB_BROKEN_014 - The MPSB is
broken