Introduction
1-20 Invenia ABUS 2.0 – System Setup and Basic Service Manual
4700-0043-00 Rev. 4
Mechanical safety (continued)
Equipment Damage
Before you move or transport the Invenia ABUS 2.0, make sure
to lock the Touch Screen Display and Display Arm to prevent
damage to the Invenia ABUS 2.0.
Equipment Damage
Keep the heat venting holes on the Touch Screen Display
unobstructed to avoid overheating of the Display.
Equipment Damage
Practice good electrostatic discharge (ESD) prevention. Wear
an anti–static strap when handling electronic parts and even
when disconnecting/connecting cables.
Equipment Damage
Do not operate this Invenia ABUS 2.0 unless all board covers
and frame panels are securely in place. System performance
and cooling require this.
Equipment Damage
Be careful not to pinch any of the cables.
To Next Page
Loading...