GE Invenia ABUS 2.0 - Page 92

System Setup
3-18 Invenia ABUS 2.0 – System Setup and Basic Service Manual
4700-0043-00 Rev. 4
10. Unfold both ramps. Then attach
the ramps to the end of the
crate with the black hook and
loop straps.
CAUTION: Ensure
that the ramps are
positioned with the white
bounding boards outside of the
black straps. These boards
keep the wheels on the ramp.
Table 3-3: Unpacking the Invenia ABUS 2.0 (for Size 1715x845x1650mm)
Step Description Illustration