GE MEDICAL SYSTEMS
DIRECTION 2300000, REVISION 2 LOGIQ™5 SERVICE MANUAL
8-180 Section 8-11 - Installing Base Software Load Image
8-11-1 Installing Base Software Load Image CD (cont’d)
NOTE: If the system is BEP3, select 1st Boot Device to 4M-HL-DT-ST-GCE-8526B
9.) Press the ESC key to return to the Setup Utility screen.
10.)Using arrow keys, select Exit & Exit Saving Change and press the Enter key.
Figure 8-217 First Boot Device to CD ROM for BEP2
Figure 8-218 1st Boot Device to 4M-HL-DT-ST-GCE-8526B
To Next Page
Loading...
