GE Power Quality Meter Series

GE Power Management PQM Power Quality Meter 5-19
5 MONITORING 5.2 A1 METERING
5
5.2.9 ANALOG INPUT
Figure 5–12: ACTUAL VALUES PAGE 1 – METERING / ANALOG INPUT
ANALOG INPUT
: This message displays the measured 4 to 20 mA analog input scaled to the user defined
name and units. The analog input can be configured via a switch input and output relay to multiplex two analog
input signals. The displayed user defined name and units will change to the corresponding values depending
upon which analog input is connected. Refer to chapter 4, Analog Input, for information regarding user defined
names and units as well as analog input multiplexing.
]] ACTUAL VALUES
]] A1 METERING
] ANALOG INPUT
]
MAIN/ALT ANALOG INPUT
20.1 mA
]] ACTUAL VALUES
]] A2 STATUS
ACTUAL
] END OF PAGE A1
]
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE