om 5184516-100 Rev. 5 B-9
9. When the "CONTINUE" button is pressed, the application will proceed to
compute the image quality parameters and compared them to their corre-
sponding specification limits.
After analysis is completed, the results will be summarized by one of the fol-
lowing two messages on the Analysis Screen.
Success message when image quality is optimal:
“Quality Assurance Program has been completed successfully - Image quality
is optimal”
Failure message when image quality is not optimal:
“Quality Assurance has failed. - Image quality is not optimal. Please call GE
Service”
If a failure message is displayed, please call GE Service.
10. Select the Complete button to finish the QAP process.
11. Exit the Service Screen by selecting the Exit button at the bottom left corner of
the screen.
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
Need help?
General
