GE
D
IRECTION FQ091019, REVISION 2 VIVID Q N SERVICE MANUAL
3-88 Section 3-10 - Connectivity Setup
3-10-2 Physical Connection
3-10-2-1 Ethernet Switch Connections
An Ethernet Switch (P/N: 066E0741), is used to connect the Vivid q N system to an EchoPAC PC and
a network printer.
3-10-2-2 Local Network Connection to EchoPAC PC Workstation
Figure 3-87 Local Network Connection
Figure 3-86 Ethernet Switch Identifications
Position Label Function
X
To PC
To connect an end station or a Server to the Port
=
To HUB
To connect a HUB or another Switch to the Port
Table 3-10 MDI Button Position Descriptions
MDI Button
Controls the fifth
connector, making it
crossed or non-crossed.
Informative LEDS
Ethernet Cable
connectors
EchoPAC PC
Vivid7
Do not use the fifth connector and the
switch can be in any position,
Use only Standard non-crossed Ethernet
cabling.
Vivid3
To Next Page
Loading...
