GE Vivid q N - AUO LCD Flex Cable Replacement Procedure

GE
D
IRECTION FQ091019, REVISION 2 VIVID Q N SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-59
8-3-9 AUO LCD Flex Cable Replacement Procedure
NOTE: In preparation for the procedures below, it is necessary to order the AUO LCD Cable and Flex RSPL
Kit as shown in the Table 8-2 below.
NOTE: For reference, the relevant parts are illustrated in Table 8-3, below:
Table 8-2 AUO LCD Cable and Flex RSPL Kit (P/N 5443867) Contents
Part Description Quantity
LCD flex (8 bit data cable)
1
Inverter Flex Board cable
1
AUO LCD cable (LCD to LED driver
1
Flex Board
1
LCD backlight Inverter Board
1
Klebeband Kapton tape
2
Display flex cover
1
Ferrite core
1
Table 8-3 AUO LCD Cable and Flex RSPL Kit - Illustrated Parts
Part Illustration
Item # as Labeled in
Figures and Referenced
in Procedures
1
2
3
4
5
6
7