GE Vivid q N - Section 4-4 Image Testing

GE
D
IRECTION FQ091019, REVISION 2 VIVID Q N SERVICE MANUAL
4-32 Section 4-4 - Image Testing
Section 4-4
Image Testing
This section provides guidelines for the following image testing checks:
- 2D Mode (B Mode) Checks - see below
- "M Mode Checks" on page 4-33
- "Color Mode Checks" on page 4-34
- "PW/CW Doppler Mode Checks" on page 4-36
- "Tissue Velocity Imaging (TVI) Checks" on page 4-37
- "Color Mode Checks" on page 4-34
- "Probe/Connectors Check" on page 4-38
NOTE: For more details, refer to the information provided in the Vivid q N User Manual.
4-4-1 2D Mode (B Mode) Checks
4-4-1-1 Introduction
The 2D Mode is the Vivid q N system’s default mode.
4-4-1-2 Preparations
1.) Connect one of the probes.
See "Connecting Probes" on page 3-58 for information about connecting the probes.
2.) Turn ON the scanner.
The 2D Mode window is displayed (default mode).
Figure 4-10 2D Mode Screen Example
Status Window
Control Menu