GE Vivid q N - AC Cable Hook Replacement Procedure

GE
D
IRECTION FQ091019, REVISION 2 VIVID Q N SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-67
8-4-3 AC Cable Hook Replacement Procedure
8-4-3-1 Tools
Appropriate Phillips screwdriver.
8-4-3-2 AC Cable Hook Removal Procedure
From the Upper Cover (rear), unscrew the four AC Cable Hook retaining screws (see Figure 8-78) and
remove the cable hook holder.
8-4-3-3 AC Cable Hook Installation Procedure
1.) Position the AC Cable Hook on the Upper Cover (rear) and return and fasten the four retaining
screws.
2) Proceed to perform the following functionality tests:
- "SafeLock Cart - Grounding Continuity" on page 10-22
- "SafeLock Cart - Chassis Current Leakage Test" on page 10-24
Figure 8-78 AC Cable Hook