GE
D
IRECTION FQ091019, REVISION 2 VIVID Q N SERVICE MANUAL
Chapter 4 - General Procedures and Functional Checks 4-27
4-3-2-5 External USB Hard Disk Test
NOTE: If the External USB Hard Disk is not currently connected to the system, refer to 8-7-2-5 "External USB
Hard Disk Installation Procedure" on page 8-136 for configuration instructions.
Table 4-15 External USB Hard Disk Test
Step Task Expected Result(s)
1
Check the External USB Hard Disk status light
indicators.
Refer to Figure 8-146 on page 8-137.
2
Create a dummy patient file on the Vivid q N scanner.
Save several images in the patient file.
3
Export the images to the External USB Hard Disk.
4
Delete the dummy patient file (including images) from
the Vivid q N database.
The deleted patient file and images are no longer listed.
5
Import the dummy patient file and images from the
External USB Hard Disk.
The patient file is now listed in the Vivid q N database.
6
Open the patient file and check that the images are
available for review.
The newly-imported images are displayed correctly on
the Vivid q N scanner.
7
Delete the dummy patient file (including images) from
the Vivid q N database.
The deleted patient file and images are no longer listed.
To Next Page
Loading...
