GE
D
IRECTION FQ091019, REVISION 2 VIVID Q N SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-41
c.) Disconnect the HVPS-to-BEP power cable.
d.) Disconnect the Fan/Speaker-to-BEP power cable.
8.) Unscrew and remove the four screws that secure the BEP to the Bottom Assembly as shown in
Figure 8-47 Disconnecting Cables from the BEP
LCD Flex cable
BEP-to-RFI Flex cable
HVPS-to-BEP Power cable
Fan/Speaker-to-BEP cable
To Next Page
Loading...
