GE
D
IRECTION FQ091019, REVISION 2 VIVID Q N SERVICE MANUAL
10-6 Section 10-3 - Maintenance Task Schedule
Examine the following on a monthly basis:
• Connectors on cables - for any mechanical defects.
• The entire length of electrical and power cables - for cuts or abrasions.
• Equipment - for loose or missing hardware.
• The keyboard - for defects.
• Brakes - for defective operation.
TO AVOID ELECTRICAL SHOCK HAZARD, DO NOT REMOVE THE PANELS OR
COVERS FROM THE MACHINE. THIS SERVICING MUST BE PERFORMED BY
QUALIFIED SERVICE PERSONNEL ONLY. FAILURE TO COMPLY, COULD
RESULT IN SERIOUS INJURY!
IF ANY DEFECTS ARE OBSERVED OR ANY SYSTEM MALFUNCTIONS OCCUR,
DO NOT OPERATE THE EQUIPMENT. INFORM A QUALIFIED SERVICE
ENGINEER IMMEDIATELY.
To Next Page
Loading...
