ADV200 • Quick start up guide 183
INT-SLAVE card
The INT-SLAVE interface card manages communication between a master unit
and a slave unit.
The INT-SLAVE cards are mounted on the master unit, their number correspond-
ing to that of the slaves that are connected (max. 4 slaves).
The INT-SLAVE card is factory-set.
In the event of a failure, the INT-P-ADV card may only be replaced by trained and
specialized Gefran personnel.
The drives mounting the INT-P-ADV cards rev L and higher, can not be connected in
parallel with drives that mount the INT-P-ADV card rev F or lower.
To Next Page
Loading...
