gefran VDI100 Series User Manual

Group 16: LCD Function Parameters
Code Parameter Name Setting Range Default Unit
Control mode
Attribute
V/f
V/f
+PG
SLV SV
PM
SV
PM
SLV
SLV2
20001~29999:
Users specify the format, Input 2XXXX
represents the display of XX.XX at 100%.
30001~39999:
Users specify the format, Input 3XXXX
represents the display of X.XXX at 100%.
16-04 Engineering Unit 0: without using engineering unit 0 - O O O O O O O
1: FPM
2: CFM
3: PSI
4: GPH
5: GPM
6: IN
7: FT
8: /s
9: /m
10: /h
11: °F
12: inW
13: HP
14: m/s
15: MPM
16: CMM
17: W
18: kW
19: m
20: °C
21: rpm
22: Bar
23: Pa
16-05 LCD Backlight 0~7 5 - O O O O O O O *1
16-06 Reserved
16-07 Copy Function Selection 0: Do not copy parameters 0 - O O O O O O O
1: Read inverter parameters and save to
the operator.
2: Write the operator parameters to
inverter.
3: Compare parameters of inverter and
operator.
16-08
Selection of Allowing
Reading
0: Do not allow to read inverter parame-
ters and save to the operator.
0 - O O O O O O O
1: Allow to read inverter parameters and
save to the operator.
16-09
Selection of Operator Remo-
ved (LCD)
0: Keep operating when LCD operator is
removed.
0 - O O O O O O O *1
1: Display fault when LCD operator is
removed
86 VDI100 • Instruction manual

gefran VDI100 Series Specifications

General

Brand	gefran
Model	VDI100 Series
Category	Inverter
Language	English