Gehl 5625SX User Manual

CHAPTER 5
CONTROLS & SAFETY EQUIPMENT
CAUTION
Become familiar with and know how to use
ALL safety devices and controls on the
Skid Loader BEFORE attempting to
operate it. Know how to stop Loader
operation BEFORE starting it. This GEHL
Skid Loader is designed and intended to
be used ONLY with a GEHL Company
Attachment or a GEHL Company approved
accessory or referral attachment. The
GEHL Company can NOT be responsible
for operator safety if the Loader is used
with a non-approved attachment.
GUARDS & SHIELDS
Whenever possible and without affecting Loader
operation, Guards and Shields are used to protect
potentially hazardous areas. In many places, Decals
are also provided to warn
of potential dangers and/or
to display special operating procedures.
WARNING
Read and thoroughly understand ALL
Safety Decals on the Loader BEFORE
attempting to operate it. Do NOT attempt to
operate the Loader unless ALL factory
installed Guards and Shields are properly
secured in place.
18
CONTROLS
Your Loader could be equipped with either "Hand
& Foot" or "T-Bar" Controls.
Follow
instructions appropriate for your Loader
type.
Fig. 1
1. Accelerator Pedal
2. Hand Throttle
THROTTLE LEVER & ACCELERATOR
PEDAL (Fig. 1)
A right-hand controlled Throttle Lever is provided on
all models for adjusting the Engine RPM.
A
right-foot operated Accelerator Pedal is also
provided to control the Engine RPM to match
increased power requirements. The Pedal linkage is
spring-loaded to return to the adjusted hand-operated
Throttle setting.

Gehl 5625SX Specifications

General

Brand	Gehl
Model	5625SX
Category	Compact Loader
Language	English