c
o
:;::::;
~
o
't:
Q)
a.
-
ctS
~
o
()
~
ii:
~C/)
...
Q)
C6
Q)
c
Q)
>
o
E
Q)
a:
CHAPTER
3
CHECKLISTS
PRE-DELIVERY
The following Checklist
is
an important reminder
of
valuable information and inspections which MUST be
made before delivering the Loader
to
the Customer.
Check off each item after prescribed action
is
taken.
Check that:
D Unit has NOT been damaged
in
shipment. Check for such
things
as
dents and loose or missing parts; con-ect or
replace components
as
required .
D Battery is securely mounted and
NOT
cracked, cable con-
nections are tight, and Battery Disconnect Switch (if
equipped)
is
in
the "ON" position.
D Lift and Tilt Cylinders, Hoses and Fittings are
NOT
dam-
aged, leaking or loosely connected.
D Radiator Hoses and Fittings are
NOT
damaged, leaking or
loosely connected.
D Filters are NOT damaged, leaking or loosely secured.
D Wheels are properly and securely attached and Tires are
properly inflated.
D Loader
is
properly lubricated and NO Grease Fittings are
missing or damaged.
D Hydraulic System Reservoir, Engine Crankcase and Drive
Chaincases are filled to their proper levels.
D All adjustment are made
to
comply with settings given
in
the Adjustments chapter
of
this manual.
D All Guards, Shields and Decals are in place and securely
attached.
D Model and Serial Numbers, for this unit,
m'e
recorded in
space provided on this page and page
I.
Start Loader Engine and test-run the unit while
checking that proper operation is exhibited by all
controls.
Check that:
D
Propulsion
Control
and Lift/Tilt Control T-bars
or
Hand/Foot Controls operate properly and are NOT dam-
aged or binding.
D Propulsion Control T-bar or HandlFoot Controls are prop-
erly adjusted for a correct "neutral" position so that Loader
does NOT creep.
D Lift Cylinder and Starter Interlock system functions prop-
erly. By design, the Engine will NOT start unless the
Operator is sitting on the Seat and the Restraint Bar
is
"lowered". Furthermore, the Lift and Tilt Circuits will not
operate unless the Operator is sitting on the Seat, the
Restraint Bar is "lowered", and the Starter Key Switch is
in the "Run" position.
I acknowledge that pre-delivery procedures were per-
formed on this unit at outlined above.
Dealership
Name
Dealer
Representative's
Name
Date
Checklist
Filled-out
Loader
Model#
Loader
Serial#
Engine
Serial#
Delivery
Check that:
The following Checklist is an important reminder
of
valuable information that MUST be passed on to the
Customer at the time the unit
is
delivered. Check off each
item as you explain it to the Customer.
Review with the Customer the contents
of
this manual;
especially:
D The INDEX at the back, for quickly locating topics;
D The SAFETY, CONTROLS & SAFETY EQUIPMENT
and OPERATION Chapters, for information regarding
safe use
of
the machine;
D The ADJUSTMENTS, LUBRICATION, SERVICE and
TROUBLESHOOTING Chapters, for information regard-
ing proper maintenance
of
the machine. Explain that regu-
lar lubrication and maintenance are required for continued
safe operation and long life.
D Give this Operator's Manual to the Customer and instruct
the Customer to be sure to read and completely understand
its contents BEFORE operating the unit.
D Explain that the Customer
MUST
consult the Engine
Manual (provided) for related specifications, operating
adjustments and maintenance instructions.
D Completely fill out the Owner's Registration, including
Customer's signature and, return it to the company.
Customer's
Signature
Date
Delivered
(Dealer's
File
Copy)
7
To Next Page
Loading...
Need help?
General
