Gehl 5625SX User Manual

HYDRAULIC SYSTEM
PROBLEM
POSSmLE CAUSE REMEDY
Lift Arm will not lower Lift Cylinder Mechanical Lock engaged.
Raise Lift Arm and disengage Lock.
or raise.
Lift Solenoid Valve malfunctioning.
Check electrical connections
to
I
Solenoid. Repair or replace as needed.
Restraint Bar not lowered.
Lower Restraint Bar.
Seat or Restraint Bar Switch
Check electrical connections
to the
I
malfunction. Switch. Replace Switches as needed.
1
I
I
Bucket drifts
Oil leaking past Tilt Cylinder Seals
Contact your Gehl Dealer for assistance.
downward with Tilt
(internal or external).
Control in
neutral.
Self-Leveling Valve
is malfunctioning.
Repair or replace
as needed.
'I
Leaking Hydraulic Hoses, Tubes, or Inspect Hoses and Tubes, tighten
I
fittings between Control Valve and
fittings
as needed. Replace Hoses or
Cylinders. Tubes as needed.
No down pressure on
Control Valve in "Float" position. Take Control out
of "Float" position.
Ii
the Bucket.
Tilt Cylinders are malfunctioning. Contact your Gehl Dealer for assistance.
Relief Valve in Control Valve not Contact your Gehl Dealer for assistance.
functioning properly. Squealing noise
should be evident.
Bucket does not level Self-Leveling Valve misadjusted or
Contact your Gehl Dealer for assistance.
on the lift cycle.
malfunctioning.
Bucket will not tilt,
Tilt Solenoid Valve malfunctioning.
Check electrical connections to Tilt
1
Lift Arms work
Solenoid and repair connections
as
properly.
needed.
If Tilt Solenoid Valves are still
not functioning properly, contact your
Gehl Dealer.
Tilt Spool
in Control Valve not actuated
Check Hose or tube connections
to
or leaking.
Valve.
High-Flow Auxiliary
Wiring to Switch or High-Flow
Check electrical connections.
Hydraulics fails to
Manifold Valve may be disconnected.
Reconnect or repair
as needed.
turn on (DX units
only).
Seat or Restraint Bar Switch
Check electrical connections to the
malfunction.
Switch. Replace Switches
as needed.
Solenoid on High-Flow Manifold Valve
Check electrical connections to
is malfunctioning.
Solenoid.
Attachment connected
Relief Valve on High-Flow Manifold Replace Relief Valve.
to High-Flow
Valve
is malfunctioning.
Hydraulics stalls or
had low power (DX
units only).
56

Gehl 5625SX Specifications

General

Brand	Gehl
Model	5625SX
Category	Compact Loader
Language	English