GEM PK5 Oriental - Selecting Performances; Selecting Performances and Style Lock; Programming the Tracks of a Performance (Edit Track)

○○○○○○○○○○○○○○○○○○○○○○○
Sounds & Performances 31
○○○○○○○○○○○○○○○○○○○○○○○
Selecting Performances
Select a Performance when you want to change the entire keyboard sound combination,
not just a single sound. The Performances can also change the Sound combination of the
Styles (see the Style chapter).
Use the following procedure to select a Performance:
1. Press the Performance Recall button.
The arrowhead to the left of the display appears next to the PERF menu function.
2. Select the Performances with the corresponding Function buttons (F1 … F9) under the display.
Use the + and – buttons of the Sound selection keypad to select a different Perform-
ance Group. The Performance Group number is shown in the 3 digit display in the
top left hand corner (G01, G02, etc.). The current Performance name is appears at
the top centre of the 8 digit display.
Selecting Performances and Style Lock
As the Performances are associated to the Styles, each time you select a Performance,
you also recall the Style to which it is associated.
If you prefer to select Performances without changing the Style auto accompaniment
patterns, activate the STYLE LOCK function.
Empty> G07
OscarCl> G02
G.Piano>
Programming the tracks of a Performance (Edit track)
PK5 Oriental contains 63 user-programmable Performances which you can modify to
suit your needs.
Performance programming tasks are a simple matter and they offer the possibility of
recalling preferred Sound combinations, Styles and panel settings.
Here is a list of tasks which can be carried out to modify the tracks of a Performance. The
important thing to remember right away is that the instrument MUST NOT be set to
PERF mode - i.e. the arrowhead to the left of the display MUST NOT indicate the PERF
menu function, and the SINGLE TOUCH PLAY button MUST BE OFF. In this situa-
tion, using the PAGE [ ] and [ ] buttons allows you to select the various pages showing
the track parameters.
1) Assign sounds to the tracks.
Select a track with the corresponding function button (F1…F9) under the display,
and recall a Sound by specifying the corresponding number on the Sound selection
keypad. The +/– buttons also control the track volume.
2) Change the ON/OFF status of the Real Time keyboard tracks.
Activate or deactivate the keyboard sections UPPER 1, UPPER 2 and LOWER.