○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
A•10 Appendix
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
RECOGNIZED CONTROL CHANGE MESSAGES (MIDI
CONTROLLERS)
A ControlChange message activates a Controlller, determined by the
first ControlChange value.
The ControlChange consists of three parts:
• status byte - (status) determines the status of the ControlChange
message.
• data byte 1 - (value 1) MIDI Controller activated by the
ControlChange message. This is the number by which the
ControlChanges are identified in the following tables.
• data byte 2 - (value 2) value of the activated MIDI Controller.
CONTROL CHANGE ON TRACKS
CC00,32 Bank change
CC01 Modulation
CC06,38 Data Entry
CC07 Main Volume
CC10 Pan (panorama)
CC11 Expression
CC16,48† Effects selection
CC17,49† Effects volume
CC18,50† General Purpose (Tuning control)
CC32 BankSelect LSB
CC64 Damper pedal
CC66 Sostenuto (sustain) pedal
CC67 Soft pedal
CC71 Resonance
CC72 Release Time
CC73 Attack Time
CC74 Filter cut-off frequency
CC80 One Shot control
CC81 On/Off control
CC91 Effect 1 send (E1, reverb depth)
CC93 Effect 2 send (E2, chorus depth)
CC98,99 NRPN
CC100-101 RPN
To Next Page
Loading...
Need help?
General
