GeoMax Zoom 30 series - Page 147

Applications Zoom | 147
Orthogonal to Station Set Out mode
Cartesian Set Out mode
1 Current position
2 Point to be set out
dL Longitudinal offset: positive if nominal
point is further away.
dT Transversal offset, perpendicular to
line-of-sight: positive if nominal point
is to the right of the measured point.
dHA Angle offset: positive if nominal point
is to the right of the actual direction.
1 Current position
2 Point to be set out
d E Easting offset between point to be set
out and actual point.
d N Northing offset between point to be
set out and actual point.
d HA
+d T
+d L
+d E
+d N