Zoom | 24User Interface
2.4 Softkeys
Description Softkeys are selected using the relevant F1 to F4 function key. This chapter
describes the functionality of the common softkeys used by the system. The
more specialised softkeys are described where they appear in the application
chapters.
Common softkey
functions
Key Description
ALPHA To change the keypad operation to alphanumerical.
NUM To change the keypad operation to numerical.
ALL To start distance and angle measurements and save the meas-
ured values.
BACK To return to the last active screen.
COORD To open the manual coordinate entry screen.
EDM To view and change EDM settings. Refer to "4.2 EDM Settings".
EXIT To exit the screen or application.
MEAS To start distance and angle measurements without saving the
measured values.
To Next Page
Loading...
