GeoMax Zoom 30 series - Responsibilities

Safety Directions Zoom | 197
13.4 Responsibilities
Manufacturer of
the product
GeoMax AG, CH-9443 Widnau, hereinafter referred to as GeoMax, is respon-
sible for supplying the product, including the user manual and original acces-
sories, in a safe condition.
Manufacturers of
non GeoMax
accessories
The manufacturers of non GeoMax accessories for the product are responsible
for developing, implementing and communicating safety concepts for their
products, and are also responsible for the effectiveness of those safety
concepts in combination with the GeoMax product.
Person in charge
of the product
The person in charge of the product has the following duties:
• To understand the safety instructions on the product and the instructions
in the user manual.
• To be familiar with local regulations relating to safety and accident preven-
tion.
• To inform GeoMax immediately if the product and the application becomes
unsafe.
• To ensure that the national laws, regulations and conditions for the oper-
ation of radio transmitters are respected.