Zoom | 84Coding
7Coding
Description Codes contain information about recorded points. With the help of coding,
points can be assigned to a particular group simplifying later processing.
Codes are stored in codelists, with each codelist supporting a maximum of 200
codes.
GSI coding Codes are always stored as free codes (WI41-49), that means that codes are
not directly linked to a point. They are stored before or after the measurement
depending on the setting made. Point codes (WI71-79) are not available.
A code is always recorded for each measurement as long as the code is
displayed in the Code: field. For a code not to be recorded, the Code: field
must be cleared. This can be set to occur automatically. Refer to "4.1 General
Settings".
Access • Either, select Survey from the MAIN MENU and press CODING.
• Or, press FNC when within any application and select Code Library.
To Next Page
Loading...
