Zoom | 76Functions
6.3 Z-Coordinate
Description This function determines the height of the instrument from measurements to
a maximum of five target points, with known heights, in two faces.
With measurements to several targets, the improvement is indicated in the "d"
value.
Access 1) Press FNC when within any application.
2) Select Z-Coordinate from the FUNCTIONS menu.
Z-Coordinate
step-by-step
1) Select a known point and input the reflector height. Select;
• PtHgt: To enter the height of a fixpoint.
• Inst.h.: To enter the height transfer values for the instrument.
1Reflector 1
2Reflector 2
3Reflector 3
4 Instrument
STn.Z
To Next Page
Loading...
