Zoom | 28User Interface
2.6 Pointsearch
Description Pointsearch is a function used by applications to find measured or fixed points
in the memory storage.
It is possible to limit the point search to a particular job or to search the whole
storage. The search procedure always finds fixed points before measured
points that fulfill the same search criteria. If several points meet the search
criteria, then the results are ordered according to the entry date. The instru-
ment finds the most recent fixed point first.
Direct search By entering an actual point number, for example 402, and pressing SEARCH,
all points within the selected job and with the corresponding point number are
found.
SEARCH
To search for matching points
within the selected job.
To Next Page
Loading...
Need help?
General
