GeoMax Zoom 30 series - Communication Settings

Settings Zoom | 61
4.3 Communication Settings
Description For data transfer the communication parameters of the instrument must be
set.
Access 1) Select Settings from the MAIN MENU.
2) Select Comm from the SETTINGS menu.
COMMUNICA-
TION SETTINGS
BTCode
To set a code for the Bluetooth
connection.
)
This softkey is only available
for Zoom 30 instruments. The
default Bluetooth code is
’0000’.
Field Description
Port Instrument port. For Zoom 30 instruments, the options are
selectable. For Zoom 20 instruments, the value is set to RS232
and is uneditable.
RS232 Communication is via the serial interface.