GHL ProfiLux 4 Programming Guide

ProfiLux 4 Programming Guide
EN 2017-02-06 22
Example with 3 dimmable lights:
Illumination
channel
Time shift during
clouds
Effect
1
0s
Light is darkened immediately in case of a cloud
2
0.5s
Light is darkened after a delay of 0.5 s in case of a cloud
3
1s
Light is darkened after a delay of 1 s in case of a cloud
The following graphic illustrates the effect:
Before the cloud
Cloud starts
Cloud is fully there
Cloud fades away
After the cloud
3.3.2 Time shift for Illumination Run
This time indicates the delay with which this lighting channel should follow its (or copied)
lighting curve (adjustable between 0s and 1h). With this function, it’s possible to distribute
switching on (or dimming up) and switching off (or dimming down) to several luminaires.
If you want your luminaires to have the same illumination run, only a little bit time-delayed,
the following procedure is recommended.
Example with 3 dimmable lights:
Illumination
channel
Time shift for
illumination run
Illumination run
Effect
1
0
Channel has its own
illumination run
Follows directly illumination run 1
2
10 Minutes
Copy of 1
Follows illumination run 1 delayed by 10
minutes
3
20 Minutes
Copy of 1
Follows illumination run 1 delayed by 10
minutes

GHL ProfiLux 4 Specifications

General

Model	ProfiLux 4
Category	Controller
Power Supply	12V DC
pH Ports	2
Redox Ports	1
Conductivity Ports	1
Level Ports	4
Digital Inputs	4
12V Outputs	4
Real-time clock	Yes, with battery backup
Digital Outputs	4
Expandable	Yes
Connectivity	USB, Wi-Fi, LAN
Display	Graphic LCD display
Expansion Slots	4
Processor	32-bit
Channels	16
Operating Temperature	0°C to 50°C