To Next Page

To Previous Page

ProfiLux 4 Programming Guide

EN 2017-02-06 80

Connect your ProfiLux 4 to GCC. Under the menu item System -> Communication you will find

your myGHL ID, which you need to use myGHL.

 There, please set the operating mode of myGHL to full read and write.

 Create your user account on myGHL and enter and copy your myGHL ID into myGHL

using copy-and-paste.

 A security key appears in the GCC, which you please also copy into the relevant

window of myGHL.

 Press Connect

A detailed video tutorial on how to connect your ProfiLux 4 to the myGHL cloud service can

be found on our homepage www.aquariumcomputer.com -/Support /Videos.

On the device itself, you can see and change the operating mode also.

You have the choice between

 Inactive

 Read only

 Read & write

9 Programmable Logic

ProfiLux 4 offers a wide range of settings for almost every application. However, there may be

situations where the user needs specific functions that are not covered by the standard

functions of the ProfiLux 4. An example: During the feed pause, the heating should always be

off, otherwise it should be temperature-dependent.

With the help of the programmable logic, the user can create a function for switching the

corresponding socket.

Compared to the other functions of the ProfiLux 4, Programmable Logic requires basic

knowledge of Boolean logic. Therefore, the corresponding settings cannot be changed on the

ProfiLux 4 itself, but only via the PC operating program GHL Control Center.

For more information about Programmable logic, please visit our website.

GmbH & Co. KG

Marie-Curie-Straße 20

67661 Kaiserslautern

www.aquariumcomputer.com

Other manuals for GHL ProfiLux 4

Questions and Answers:

Need help?

Do you have a question about the GHL ProfiLux 4 and is the answer not in the manual?

General