ProfiLux 4 Programming Guide
EN 2017-02-06 30
Esc finishes the light demo.
3.15 Time lapse
The Time lapse can be used for test and demonstration purposes. With this function you can
view the adjusted illumination run in time lapse.
There is a manual time lapse (indicated by an M in the upper right) and an automatic time
lapse (indicated by A). You switch between both modes by pressing Return.
In manual time-lapse, you can set the time to be simulated, at which the appropriate lighting
is to be displayed.
During the automatic time-lapse, the time to be simulated is constantly incremented, you can
set the speed of the time-lapse. Set the duration, in seconds, to be used for 24-hour
simulation.
Esc finishes the time-lapse.
3.16 Acclimation
The acclimation function provides a simple and comfortable way to automatically change the
brightness of the light over a span of several days. We recommend using this simulation for
acclimating corals/plants to a new lighting program or when corals have been newly brought
in.
After activating, the following settings can be made:
Start date – The acclimation period begins on this day
Start percent- With this value, all dimmable lights are multiplied at the beginning of the
acclimation
End date - The acclimation period ends on this day
End percent - With this value, all dimmable lights are multiplied at the beginning of the
acclimation
During acclimatization, a dimming factor is calculated daily. The individual illumination runs
are converted according to this factor.
Example: Start on 01.12.2016 (12-01-2016) with 50%, end on 03.12.2016 (12-03-2016) with
100%
To Next Page
Loading...
Need help?
General
