iii
If the cutting plotter generates smoke, overheats, emits a
strange odor, or otherwise functions abnormally, do not
continue using it. Turn off the power and unplug the power
cord from the electrical socket.
• Use of the cutting plotter in such a condition may result in a fire
hazard or electric shock.
• After confirming that smoke is no longer being emitted, contact
your sales representative or nearest Graphtec vendor for
repairs.
• Never attempt to perform repairs yourself. Repair work by
inexperienced personnel is extremely dangerous.
Do not allow dust or metal scraps to adhere to the power
plug.
• A dirty power plug may result in electric shock or a fire hazard
due to current leakage.
Do not use the power cord if it is damaged.
• Use of a damaged cord may result in electric shock or a fire
hazard due to current leakage.
• Replace the power cord with a new one.
Be careful when handling the cutter blade.
• Touching the blade with your bare hand may cause injury.
• Do not touch the cutter blade while cutting is in progress.
Safety Precautions (Continued)
WARNING
Prohibited
Prohibited
Beware of electric shock
Unplug the power
cord from the socket
Do not touch
To Next Page
Loading...
