v
Do not attempt to lubricate the cutting-plotter mechanisms.
• Such action may cause it to break down.
Do not clean the cutting plotter using volatile solvents such
as thinner or benzene.
• Such action may impair its performance.
Provide sufficient space around the cutting plotter so that it
does not strike any objects in its vicinity during cutting or
plotting. Such contact may cause misalignment in cutting or
plotting.
• Such contact may cause cutting or plotting to go out of
alignment.
When using indoor lighting such as fluorescent or other
electrical lamps, provide a distance of at least one meter
between the cutting plotter and the light source.
• Close proximity of such a light source may cause the sensor to
malfunction and prevent proper size detection of the media.
When using the cutter, take care not to extend the blade more
than necessary.
• An overly extended blade will damage the cutting mat and
adversely affect the cutting quality.
Move the pen carriage slowly when moving it manually in
order to load the medium or for other reasons.
• Moving it quickly may damage the cutting plotter.
Safety Precautions (Continued)
CAUTION
Prohibited
T
h
i
n
n
e
r
B
e
n
z
i
n
e
Prohibited
Do not touch
To Next Page
Loading...
