134 Detail program description - Switch display
Switch display
Displaying switch positions
Use the selection keys on the left or right touch pad
to scroll to the »Switch display« option in the multi-
function menu:
Model select
Servo adjustment
Stick mode
Control adjust
Dual Rate / Expo
Channel 1 curve
Switch display
Copy / Erase
Suppress codes
Suppress models
Base setup model
Model type
Model select
Servo adjustment
Stick mode
Control adjust
Dual Rate / Expo
Channel 1 curve
Switch display
Copy / Erase
Suppress codes
Suppress models
Base setup model
Helicopter type
Open this menu option with a tap on the center SET
key of the right touch pad.
Switch
Contrl
1
C1 C2 C3
C8
2345678910
11 12 13 14 15 16
switch
C4
C5
C6 C7
This feature is used to check the functions and
give an overview of switches 1 … 16 and the
programmable control switches C1… C8.
If a switch is pressed, the switch number is revealed
by one of the display items changing from an OFF
to an ON symbol (or vice versa). To improve the
legibility of this screen, a closed switch fi eld is also
shown in inverse video (i.e. on a dark background).
For control switches C1 … C8, activation of the
corresponding transmitter control – which must have
been previously assigned on the »Control switch«
menu – will reveal the control switch number and
direction.
Note:
Switch numbering 1 to 16 as shown here corresponds
to the labeling of switch plug-in locations on the
transmitter's circuit board. The numbering of the
switches has no effect on the programming of the
transmitter, however.
To Next Page
Loading...
Need help?
General
