264 Detail program description - Entry lockout
Entry lockout
Locking the multifunction menu
Use the selection keys of the left or right touch pad to
scroll to menu option …
Profi trim
Trim memory
Telemetry Channel sequence
Multichannel Ring limiter
Mp3 player
Basic settings
Servo display Servo test
Code lock Info display
… in the multi-function menu. Tap briefl y on the
center
SET key of the right touch pad to open this
menu option:
CODE LOCK
Desired (new) access code:
(_ )
SET
321 3 4
Access to the multifunction menu can be locked
against unauthorized use by a four-digit secret code
comprised of the numbers 1 to 4. This code lock is
entered by way of the selection keys of the left touch
pad according to the scheme shown in the display, for
example :
CODE LOCK
Desired (new) access code:
(123_)
CLR
321 3 4
As soon as another tap of a left touch pad selection
key occurs after the fourth number has been entered,
the message shown below will appear in the display:
CODE LOCK
Bitte Geheimzasccess code:
(1234)
CLR3
21 3 4
Memorise access
code carefully
A brief tap on the center ESC key of the left touch
pad will confi rm the entered secret code and exit the
menu.
On the contrary, a brief tap on the center
SET key of
the right touch pad will confi rm the currently active
CLR fi eld at the bottom right of the display and thus
erase the entered digits.
Make note of the secret code and keep it safe.
Otherwise, the transmitter must be sent in to
Graupner service for decoding.
The lock becomes active the next time the transmitter
is switched on. However, the control remains ready
for operation. However, a call-up of the multi-function
menu, and thus also a model change, can no longer
be accomplished without entering the correct number
combination.
CODE LOCK
Desired (new) access code:
(_ )
SET
321 3 4
A renewed attempt following an incorrect entry is only
possible after the lapse of a time-out.
CODE LOCK
Bitte Geheimzacccess code:
(4321)
CLR3
21 3 4
Input error
Time lock
Deletion of the secret code
If the secret code is to be erased later on, tap twice
on the center
SET key of the right touch pad right
after calling up this menu option.
CODE LOCK
Desired (new) access code:
(1234)
CLR3
21 3 4
The fi rst activation of the center SET key of the right
touch pad will erase the secret code (
CLR):
CODE LOCK
Desired (new) access code:
(_ )
SET
321 3 4
and the second activation will confi rm the empty entry
fi eld (
SET). The message shown will appear in the
display:
To Next Page
Loading...
Need help?
General
