240 Detail program description - Telemetry
SENSOR SELECT
Selecting sensors
After selection of the desired menu line with the cd
selection keys of the left or right touch pad …
TELEMETRY
SETTING & DATAVIEW
SENSOR SELECT
RF STATUS VIEW
VOICE TRIGGER
TELEMETRY RCV
BIND. 1
VOLT.E
… and a subsequent tap on the center SET key of
the right touch pad, the selected sub-menu will open.
SENSOR SELECT
RECEIVER
GENERAL MODULE
VARIO MODULE
ELECTRIC AIR.MOD
GPS
This menu option can be used to determine which
of the graphic displays described on page 36, as
well as those described previously for sub-menu
»SETTINGS/DISPLAYS«, can be selected and which
remain hidden.
Activate (
) or deactivate ( ) the display of
respective sensors by selecting the desired lines with
the cd selection keys of the left or right touch pad
then tapping on the center
SET key of the right touch
pad, e.g.:
SENSOR SELECT
RECEIVER
GENERAL MODULE
VARIO MODULE
ELECTRIC AIR.MOD
GPS
To Next Page
Loading...
Need help?
General
