Hold
ldle-up1
ldle-up2
ldle-up3
Hold
ldle-up1
ldle-up2
ldle-up3
Hold
ldle-up1
ldle-up2
ldle-up3
Hold
ldle-up1
ldle-up2
ldle-up3
Hold
ldle-up1
ldle-up2
ldle-up3
Hold
ldle-up1
ldle-up2
ldle-up3
Hold
ldle-up1
ldle-up2
ldle-up3
Hold
ldle-up1
ldle-up2
ldle-up3
Hold
ldle-up1
ldle-up2
ldle-up3
1-2 NAM
It is used when to revise the name of “Q.LINK”. Touch the target value in “Q.LINK” to activate
in blue. Now touch “NAM” icon to call NAM setup page. In the page, enter the desired name
using the keypad. After that, touch “EN” icon then the revised name is displayed in “New
Q.LINK Name”. Now, touch “BACK” icon on the left top left to call “Q.LINK” setup page and the
revised name is stored at the corresponding Q.LINK.
Touch
Touch
Touch
Touch
Touch
Touch
Touch
Touch
Touch
1-1 NEW
This function is used to create new Q.LINK. Touch the value in “Q.LINK” line to activate it in blue
and touch “NEW” icon in the right to call “CTRL” and “DELAY” options. In “CTRL” setup, touch
“NULL” icon to call “Select” message popup and move the switch or stick with your choice then the
switch or stick is set to Q.LINK switch. To set “DELAY” function, touch “0.0s” icon to activate in blue
and set the delay time with “INC” and “DEC” buttons. DELAY indicates the time till Q.LINK start to
work after Q.LINK is switched on
30
NORMAL
To Next Page
Loading...
Need help?
General
