92
9-4. FLAP >> ELEV
This mixer is used to set elevator (pitch-trim) compensation when a ap command is given. This
typically enables you to adjust the model’s airspeed automatically when aps are lowered.
In FLAP MIX page, touch “INH” icon in ACT line to switch to “ON” then FLAP >> ELEV function
is activated. Touch “ON” in CTL line to call the “Select” message popup and move the switch
or stick or volume with your choice then that switch or stick or volume is designated as on/ off
key and then the key direction setup page appears. You may select ON or OFF by touching
icons. When the key is moved to the direction of ON, the function is operated. Touch “BACK”
icon to return to FLAP MIX page. Touch “>>” icon in “SET” and “FLAP >> ELEV” cross line to
call “FLAP >> ELEV” setup page. Touch and activate the values in blue and adjust them with
INC and DEC buttons. When the setup is completed, touch SERVO icon on the top right to call
SERVO page. You may check the setup value for “FLAP >> ELEV”.
Touch
Touch
Touch Touch
Touch
Touch
Touch
Touch
Touch
Touch
To Next Page
Loading...
Need help?
General
