90
Touch
Touch
Touch
Touch
Touch
Touch
Touch
9-2. AILE >> FLAP
This mixing allows the entire trailing edge of the wing (aileron and ap) to operate as ailerons.
When active, as aileron is applied the aps also move so that the airplane rolls faster. In
FLAP MIX page, touch “INH” icon in ACT line to switch to “ON” then AILE >>FLAP function is
activated. Touch “ON” in CTL line to call the “Select” message popup and move the switch or
stick or volume with your choice then that switch or stick or volume is designated as on/ off key
and then the key direction setup page appears. You may select ON or OFF by touching icons.
When the key is moved to the direction of ON, the function is operated. Touch “BACK” icon to
return to FLAP MIX page. Touch “>>” icon in “SET” and “AILE >> FLAP” cross line to call “AILE
>> FLAP” setup page. Touch and activate the values in blue and adjust them with INC and
DEC buttons. When the setup is completed, touch SERVO icon on the top right to call SERVO
page. You may check the setup value for “AILE >> FLAP”.
Touch
Touch
To Next Page
Loading...
Need help?
General
