14-4. RF STATUS VIEW
It shows RF status between transmitter and receiver throughout telemetry function
Touch “>>” icon in RF STATUS VIEW line then the indication to show the RF connection status is
displayed by graph.
14-5. VOICE TRIGGER
It is used to program the sensors related with voice option. REPEAT, TRIG, VARIO, TRANS-
MITTER, RECEIVER are available by default and the optional sensors could be attached. If the
optional sensor is connected, it is need to add the optional sensor at SENSOR SELECT mode
then new category in VOICE TRIGGER is created. The useable sensors are GENERAL MODULE,
ELECTRIC AIR MODULE, VARIO MODULE, GPS, AIR ESC
Touch “>>” icon in VOICE TRIGGER line to call “VOICE TRIGGER” setup page.
- REPEAT
You may set the time and designated the transmitter control for one of voice options. If the control
is on, that voice option is repeated for the setup time.
Touch the value, “01s”, in blue and adjust the repeat time with INC and DEC buttons. Touch
“NULL” icon to call the “Select” message popup. Move the switch or volume with your choice then
that switch or volume is designated as on/ off key and then the key direction setup page appears.
You may select ON or OFF by touching icons. When the key is moved to the direction of ON, the
function is operated. Touch “BACK” icon to return to “VOICE TRIGGER” setup page.
Touch
Touch
66
14-3. SENSOR SELECT
This function is used to program telemetry sensor that is connected to HoTT receiver.
You should select the sensor rst to use and program the function such as voice option, warn-
ing and the telemetry data information.
Touch “>>” icon in SENSOR SELECT line then RECEIVER, GENERAL MODULE, ELECTRIC
AIR, MOD, VARIO MODULE, GPS, and ESC are displayed. RECEIVER is set to ON, the
others are set to OFF by default.
To select the sensor, touch “OFF” icon to switch to “ON” then voice option, warning and the
telemetry data information are available. After the sensor selection is completed, touch “BACK”
icon to return to the previous page.
Touch
Touch
Touch
Touch
To Next Page
Loading...
Need help?
General
