Telemetry
Telemetry
Telemetry
7. SWASH
The swash function supports adjustment of the travel amount and direction of the aileron, eleva-
tor and pitch in Helicopter mode. Bind a helicopter to a receiver and set the travel amount and
direction of the swash channels desirably Touch “SWASH” icon to call “SWASH” setup page.
When touching the values in PITC, AILE and ELEV, they are activated in blue. You may adjust the
values with INC and DEC buttons. The default value is 60%. If the minus value is programmed, the
travel direction of the swash channel is reversed. You may watch the servo operation by touching “
SERVO” icon in the right top. Touch “BACK” icon to return to the function page.
Touch
Touch
Touch
Touch
Touch
Touch
Touch
Touch
42
To Next Page
Loading...
Need help?
General
