Etc.Set
Etc.Set
Etc.Set
2. Warning
The Warnings function is for an alarm sound ON/OFF. You can program 5 warnings such as
“Throttle Hold”, “Throttle Cut”, “Thro Position”, “Quick Link”, and “Power Off time”. “On” is set in
only “Thro Position” by default, but “Off” is set in the others by default. Touch “ON/OFF” icons
to switch to “OFF/ON”. After the setup is completed, touch “BACK” icon on the top left to return
to “SYSTEM” menu page.
Touch
Touch Touch
Touch
Touch
Touch
Touch
Touch
99
1. ST mode
There are 4 fundamental options for assigning the four control functions (aileron, elevator, rudder
and throttle/brake ap) for a winged aircraft model to the two sticks. Just which of these options is
chosen depends on the individual preferences of the individual model pilot.
“Mode 1” is widely used in ASIA and Mode 2 is widely used in North America and Europe and also
mode 3, 4 are available to use.
In the initial page, touch “SYSTEM” icon to call SYSTEM setup page and touch “ST mode” icon to
call ST mode setup page. In ST mode setup page, ST mode is selectable from “1” to “4” whenever
“ST mode number” is touched and the indications are displayed for each ST mode. When the stick
setup is completed, touch “BACK” icon to call the SYSTEM menu page
SYSTEM (Helicopter, Airplane, Gilder)
Touch
To Next Page
Loading...
Need help?
General
