94
Touch
Touch
Touch
Touch
Touch
Touch
Telemetry
When the key is moved to the direction of ON, the function is operated. Touch “BACK” icon to the
previous page. Now, you may set the operation value. Touch and activate the values in blue and
adjust them with “INC” and “DEC” buttons. FLAP and ELEV can be programmed in the same way
after accessing the next page. After performing the programming setup of AILE and FLAP and
ELEV in turn, touch SERVO icon on the top right to call SERVO page. You may check the setup
value for Flap sett. When Tx CTL are set to DV1, DV2, DV3, DV4, SL1, and SL2 in advance, the
setup values are controlled delicately by operating “DV” or “SL” while ying
Touch
Touch
Touch
Touch
Touch
To Next Page
Loading...
Need help?
General
