GRAUPNER mz-24 HOTT Operating Instructions

Touch
Touch
ACT
A
CTL
B
ACT
A
CTL
B
ACT
A
CTL
B
ACT
A
CTL
B
Touch
Touch
Touch
Touch
Touch
Touch
Touch
Touch
ACT
A
CTL
B
ACT
A
CTL
B
ACT
A
CTL
B
ACT
A
CTL
B
ACT
A
CTL
B
ACT
A
CTL
B
46
Telemetry
11-2. Curve mixing type
In the prog.mix page, touch “NEXT” icon to call the next page. Number 6~8 are used for PRO.
MIX curve mixing. Touch any of them to switch to ON in ACT line. If so, mixing is available to
use.
Touch “NONE” in MST line to access the channel selection page and touch and activate
“NONE” icon to select the desired channel of MST and SLV. Touch “BACK” icon to return to
the prog.mix page. Touch “>>” icon to call the program mixing setup page. Now, you need to
set CTL function.
- CTL setup with a switch
Touch “ON” icon in CTL line to call “Select” message popup then move the switch with your
choice then that switch is designated as on/ off switch and then the switch direction setup
page appears. You may select ON or OFF by touching icons. When the switch is moved to the
direction of ON, the function is operated. Touch “BACK” icon to return to the program mixing
setup page.

GRAUPNER mz-24 HOTT Specifications

General

Brand	GRAUPNER
Model	mz-24 HOTT
Category	Receiver
Language	English