To Next Page

To Previous Page

Touch

•

“S-TRAVEL -, +”

It is used to set the mix operation range of SLAVE CH.

Touch “SET” icon to activate the value in red and select the slave channel number with INC

and DEC buttons. Touch “SET” icon again to deactivate the value. If you operate the master

channel, the slave channel is operated within the setup range at the same time. Touch INC

button to move the cursor to “TAIL TYPE”

• SLAVE CH

You may set the salve channel of FREE MIXER.

Touch “SET” icon to activate the value in red and select the slave channel number with INC and

DEC buttons. Touch “SET” icon again to deactivate the value. Touch INC button to move the cursor

to “S-TRAVEL-”

GRAUPNER mz-24 HOTT Operating Instructions

Other manuals for GRAUPNER mz-24 HOTT