59
Touch
Touch
Touch
Touch
• TAIL TYPE
You may select the appropriate tale type for the airplane that you use
Touch “SET” icon to activate the value in red and select the appropriate tale type with INC and
DEC buttons. Touch “SET” icon again to deactivate the value. Touch “ENT” icon on the right to
access to the next page, “RX CURVE”,
Touch
Touch
Touch
Touch
- RX CURVE
It is used to set the curve of CH2, CH3, and CH4 and 3 types of A, B, and C are selectable.
> A type: Sensitive operating
> B type: Normal operating
> C type: smooth operating
The default, B type is set and it is very similar with “EXP” function of transmitter. You may transfer
the cursor, >, with INC and DEC buttons and can select the desired category.
Touch “SET” icon to activate the value in red and select the channel and type with INC and DEC
buttons. Touch “SET” icon again to deactivate the value. If you operate the master channel, the
slave channel is operated within the setup range at the same time. Touch “ENT” icon on the right to
access to the next page, “RX SERVO TEST”,
Touch
Touch
To Next Page
Loading...
Need help?
General
