Page 118 Diagnostics – PAT700 Total Organic Carbon Analyzer
Operator Manual Anatel
WGM - 28 November 2007 - Edition 01
Figure 8-9 Select bottles to load dialog box, plumbing test
CAUTION
Potential puncture hazard! Contact with the exposed needle could cause serious
injury. Use extreme care when installing and removing the sample bottles.
CAUTION
Potential burst hazard! Do not exceed the maximum 100 psi (690k Pa) sample pressure
ratings.
1) After you’ve selected the bottles to load, install the grab samples bottles following
the instructions as shown in the load bottles dialog box (Figure 8-10) and ensuring
that you place the bottles in the correct positions.
2) Close the bottle bay door.
To Next Page
Loading...
